SABIC® PC0703R – UV/heat-stabilised, mould-release polycarbonate optimised for profile extrusion and clear covers. Low-flow (MFR 7 g/10 min @ 300 °C/1.2 kg) for precise dimensional control, with high impact strength and optical clarity (88–90% LT @ 2.54 mm, <0.8% haze) – ideal for outdoor, see-through parts.
Sold by container only: 24.00 mt/container. Quantity = number of containers.
Low-flow consistency (MFR 7 g/10 min @ 300 °C / 1.2 kg) – enables stable, precise profile extrusion and controlled filling.
UV/heat stabilised – retains clarity and toughness for outdoor use.
High impact strength – Izod notched 70 kJ/m² @ 23 °C resists cracking in handling and service.
Optical clarity – 88–90% light transmission with <0.8% haze (2.54 mm) for see-through parts.
Property
Typical Value
ISO Method
Melt Volume Rate (300 °C / 1.2 kg)
6 cm³/10 min
1133
Density
1.20 g/cm³
1183
Izod Notched, 23 °C
70 kJ/m²
180/1A
Vicat Softening Point (B/50)
144 °C
306
Heat-Distortion Temp. (1.8 MPa, annealed)
127 °C
75/Af
Mould Shrinkage (flow)
0.50 – 0.70 %
SABIC Method
Applications & Certifications
Typical Applications of SABIC® PC0703R
• Extruded sheets & profiles – signage covers, protective guards, machine shields (grade tailored for extrusion). • Outdoor housings & covers – UV/heat stabilisation helps retain appearance and toughness. • Transparent electrical/telecom covers – passes 125 °C Ball Pressure Test for device integrity. • Injection-moulded clear parts – when you need high rigidity and impact in a glossy finish (processing window provided).
Certifications / Standards
• UL 94: 94V-2 @ 1.6 mm (UL Recognized). • Ball Pressure Test: Pass @ 125 °C ± 2 °C (IEC 60695-10-2).
SABIC® PC0703R blends outdoor-stable clarity, high heat strength, and extrusion-friendly flow—ideal for clear profiles, guards, and covers that must look good and last.
English 
Vietnamese 
Chinese 
