HDPE SABIC M200050

主要特点

• Flows easily, moulds fast – melt-flow rate 17 g/10 min (190 °C / 2.16 kg) fills multi-cavity tools without excessive pressure.

• Stays straight & shiny – formulation targets low warpage and high gloss for clean-looking parts.

• Rigid but not brittle – tensile yield 22 MPa, flexural modulus 620 MPa keep boxes and buckets tough under load.

• Good heat resistance – Vicat softening point 124 °C handles hot-fill cleaning and summer transport temps.

• Predictable processing window – barrel 200–250 °C, mould 15–60 °C; suitable for standard HDPE equipment.

快速规格（典型值，23°C）

应用与加工 / 合规性

Typical uses

• Industrial parts cases and component boxes

• Farm-produce and beverage crates

• Pails, paint buckets and chemical tubs

Processing guide
Barrel 200–250 °C · Mould 15–60 °C · Dry, ventilated storage below 50 °C; process within 6 months for best gloss.

合规说明
技术说明书中未列出特定的食品接触或阻燃等级；使用前请索取最新的 FDA/EU 或 RoHS 合规确认函。

SABIC HDPE M200050 提供了所需的流动性、刚性和表面质量，使大批量的箱子、盒子和桶在生产线上高效运作，同时保持外观清晰。